Comments on: High-Speed Smart 3D Printer with Core XY Structure and Auto Shutdown

By: Zetta Jones

Zetta Jones — Mon, 29 Apr 2024 19:31:04 +0000

This printer is remarkably straightforward to set up, albeit with a slightly longer initial start-up time than advertised, including a 9-minute warm-up. Preparing the printer involves removing four screws to release the bed, and applying the provided grease to the Z-axis. Following the warm-up, I loaded the provided filament and printed a calibration cube, which yielded exceptional print quality compared to my previous three 3D printers. I experienced only one failed print, due to my oversight in not using the provided glue. This printer is, without a doubt, the best I’ve ever owned.

By: Ludie Lehner

Ludie Lehner — Mon, 29 Apr 2024 15:47:12 +0000

Prints quickly and accurately. Great printer. The delivery was really delayed, the box came with holes. But inside everything is whole. There were problems with unscrewing the transport screws, they were tightened from the heart, and when unscrewed with a standard hexagon, the splits were licked. I had to unscrew the table to reach them with pliers. But all the norms, it worked. When the top cover is closed, the Teflon tube scratches it with its bend. It is necessary to collective farm something if you want to preserve the transparency of the acrylic cover for a long time. In general, the printer for that kind of money is just space!

By: Gretchen Waelchi

Gretchen Waelchi — Wed, 24 Apr 2024 10:59:59 +0000

There is experience in printing, but you didn’t have to bother with this printer at all: the shaft, launched, tested, connected the WiFi, immediately updated and printed from the beginning with plastic from the manufacturer 250 grams gives, then PETG without problems: fast and high quality.

By: Amina Mante

Amina Mante — Thu, 18 Apr 2024 15:46:59 +0000

This printer impresses right from the start, offering ease of use that’s perfect for beginners. It operates quietly for a 3D printer, a quality I particularly appreciate. The features that stand out are its automatic bed leveling and the convenience of slicing files on the computer before sending them directly to the printer. This process not only saves the file to the printer’s memory for future access but also signifies a significant improvement over my previous Ender 3 V2. Despite the initial lower cost of the Ender, the additional upgrades I purchased made it more expensive by $50 compared to this model, without matching the quality of the Flash Forge. I had acquired several enhancements like the BL touch, upgraded springs, an all-metal hot end, and a Capricorn Bowden tube, not to mention a Creality enclosure which by itself brought the price close to this printer, but was of poor quality. Ultimately, this printer proves to be an excellent investment, offering ease in loading and swapping filaments.

By: Camille Mertz

Camille Mertz — Thu, 11 Apr 2024 09:10:38 +0000

My experience with this printer has been exceptional, distinguishing itself as not only the quickest but also the most user-friendly and convenient printer I’ve owned. Its true auto-leveling feature simplifies the process significantly—just press a button. If the filament runs out, the printer pauses and notifies you, allowing for an easy refill and resume. The need for bed adhesion tricks is eliminated by its textured plate, which holds prints securely with minimal effort, although glue can be used for extra security. The printing speed is notably faster, up to six times quicker than my Adventurer 4.

By: Brennan Parker

Brennan Parker — Fri, 05 Apr 2024 14:00:06 +0000

The seller quickly sent the goods and it was delivered to me by courier in 4 days, fast delivery. The printer came in a slightly torn box, but the packaging inside the box is very reliable, everything is fully intact and unharmed, all plastic doors are in films, a printing table on shipping bolts. The printer really started working straight out of the box without any dance with a tambourine, just the first steps, you need to do according to the instructions. The quality and speed of the print were of course surprised. Surprised that the print quality does not suffer at this speed. It comes with everything you need to start printing without problems. Super printer, great seller.

By: Weldon Cummerata

Weldon Cummerata — Thu, 04 Apr 2024 05:17:06 +0000

Extremely easy to use. In the instructions, the whole process is described in detail. 30 min and he’s ready to go. Prints perfectly. At the moment the best price/quality solution. Printed on the basic settings out of the box!

By: Marco Torp

Marco Torp — Mon, 01 Apr 2024 13:34:25 +0000

After adding this printer to my collection of 10, I am considering selling some to acquire more of these models, attesting to their superior quality.
There is not enough explanation in the manual how to connect the printer to the orcaslicer, as it produces a file transfer error

By: Raegan Thompson

Raegan Thompson — Tue, 26 Mar 2024 18:29:28 +0000

The fastest printer I had. Now the delta can be sent to retire

By: Jarrell Kautzer

Jarrell Kautzer — Tue, 26 Mar 2024 11:25:51 +0000

Not the first time I order from this seller!
Respond quickly. Sent immediately after payment!
The printer itself is great!
The print quality is good straight out of the box. This is the best option for this money!
Plus the power wire is 1,8 meters long. this is very good, because even at k1max 0,8 meters.
The printer is quiet!
Itself the owner of Bambu lab X1 Carbon and I really liked the 5 m pro.
So he took his place of honor.
Definitely recommend!

By: Miller Emmerich

Miller Emmerich — Sun, 24 Mar 2024 18:08:14 +0000

But I wanted to put 5. The first day everything is fine. I’m new to this and I really liked the way it prints on the standard settings. But unfortunately the z position sensor died on Day 2. I thought it would fall apart… Wrote in support waiting for an answer (they always respond quickly to problematic questions). The plastic was given awesome for testing. It’s a pity that only 250g.😔

By: Henry Grimes

Henry Grimes — Sun, 24 Mar 2024 14:20:37 +0000

Excellent printer, prints quickly and accurately compared to the past Neptune 3 Pro which was 3 times slow

By: Andreane Goldner

Andreane Goldner — Sun, 24 Mar 2024 03:13:40 +0000

The printer is very well assembled, from the factory calibrated and customized. Really prints out of the box, even Z-offset set correctly. Its only drawback is the size of the printed space, it would have a larger printing field. And he also lacks synchronization with an orcopter to send to print remotely! Generally this is a mini bamboo

By: Adaline Stracke

Adaline Stracke — Wed, 13 Mar 2024 13:54:08 +0000

Great printer!
Unpacked launched, and very much hurt what this beast is doing)))

By: Loraine Nienow

Loraine Nienow — Wed, 06 Mar 2024 08:37:06 +0000

This is my first 3D printer and I still understand the settings, but I like the printer-it prints well and quickly. The printer was delayed by a week, but the seller compensated my mental anguish for waiting with a portion of PLA plastic 🙂

By: Trent Tillman

Trent Tillman — Sun, 11 Feb 2024 19:55:32 +0000

Printer is great, after Prusa mk3S+ first 10h of printing looks great

By: Saige Hoppe

Saige Hoppe — Wed, 07 Feb 2024 06:21:52 +0000

For my son’s 12th birthday, I chose this printer as his gift. However, it turned out that I had to manage most of its operations, making it less suitable for younger users. The setup was straightforward, and it connected to my Wi-Fi seamlessly. Although I primarily use online templates due to my lack of design skills, the printer has performed well. I encountered a filament clog, necessitating the purchase of a needle kit and other maintenance tools. It’s crucial to carefully check the filament reel dimensions when buying from alternative brands, a lesson I’ve learned the hard way. The print quality is impressive, and fortunately, there’s no unpleasant odor, a common issue with some other printers. I highly recommend it for those seeking a low-maintenance 3D printing solution.

By: Mariah Larson

Mariah Larson — Tue, 06 Feb 2024 19:17:26 +0000

Very fast delivery, the printer is just space, honest responsible seller. Everything is super! Thank you so much! I will now be a regular buyer))

By: Jaden Pollich

Jaden Pollich — Fri, 02 Feb 2024 16:48:22 +0000

Excellent printer, the printing speed of HS PLA is incredible of course, it is a pity that HS PETG does not happen, the table is slightly screwed up with screws from the bottom, leveled the horizon with a difference of no more than 0.5mm to reduce the load on the Z motor.
Built-in camera and ventilation with a filter, cool features, I advise unambiguously.

By: Winona Block

Winona Block — Wed, 31 Jan 2024 04:11:17 +0000

The printer is excellent, I took it for the company by 5 m. Prints perfectly, shoots video, the 0.6 nozzle is included. I recommend it.